Download QuickPwn 2.0.2
August 21, 08 by Doug My Average |
VS |   Your Average |
I have updated the the Jailbreak Guide for step by step instructions on how to Jailbreak 2.0.2
Note - This is for Windows users only. . .Mac users will have to wait until the PwnageTool update is released. Subscribe to our RSS Feed and we’ll tell you exactly when that happens
Windows users can now jailbreak your 2.0.2 iPhone or iPod Touch. Sadly there still isn’t a way to unlock your iPhones(but I hear they are hard at work on it).
Click HERE or HERE or HERE to download the updated version.
I am updating my 2.0.1 jailbroken iPod to 2.0.2 and will test this right now. I will update this post live as things happen.
- Updating to the 2.0.2 firmware via iTunes
- Opening QuickPwn, Selecting iPod Touch, Locating Firmware, Keeping Cydia, Installer, and Boot Logo checked, clicking Go!
- Command line window opens, it’s telling me to turn off my ipod/iphone and then pressing enter
- ipod is off, and pressing enter
- Putting ipod into DFU mode(im just following the steps)
- text scrolls, ipod touch screen turns white
- screen goes black, winpwn logo appears. . .still waiting
- winpwn logo disappears, wheel spinning above the home button(at the bottom of the screen)
- ipod reboots, no more spinning wheel. . .just a winpwn logo
The iPod touch is back to the home screen with the App Store, Cydia, and Installer installed successfully.
sigh Says: 21.08.08 at 7:54 pm
This is still just for 2.0.1 according to the software I just downloaded.
Doug Says: 21.08.08 at 7:59 pm
@Sigh, make sure to download the link i put in the post. Before the command line at the bottom of the QuickPwn window it clearly says it supports 2.0 - 2.0.2(and it worked correctly for me)
BOSS Says: 21.08.08 at 9:21 pm
Is there much of a difference in QuickPwn and WinPwn? I am currently using WinPwn and i was only able to get cydia to work and Installer didn’t work it would give me error messages constantly. Do you think if i jailbreak using QuickPwn it would work? If so do you jailbreak the same way using QuickPwn as WinPwn?
Doug Says: 21.08.08 at 9:48 pm
QuickPwn seems to fix all the issues most users were having with WinPwn and 2.0.1.
QuickPwn doesn’t create a ‘custom firmware’ for you to load via iTunes. It simply goes in and hacks it quickly. The GUI looks like the PwnageTool(for Macs)
amp3d Says: 21.08.08 at 11:54 pm
Great info! It’s appreciated!
I just picked up a touch tonight running 2.0.1 but I am going to update it now I think. Is it better to wait for the new winpwn support 2.0.2? Is it easily reverted back to previous firmwares if need be?
Doug Says: 22.08.08 at 12:22 am
@Amp3d, awesome, let me know how everything goes
ken.kzpd Says: 22.08.08 at 3:31 am
Thanks Doug! I just updated to the 2.0.2 firmware and use QuickPwn jailbreak everything fine. thanks a lot :) :) :)
S41N7 Says: 22.08.08 at 7:32 am
updated without a hitch. remember to install 2.0.2 ofw first. before doing anything though i reccommend using the app bacup tool (available from cydia - i did not and am now restoring all my cydia apps) and then back up your iphone with itunes.
Black Simorgh Says: 22.08.08 at 10:36 am
and what about mac users? do you know when you can jailbreak your Device on a mac?
Kasper Says: 22.08.08 at 1:20 pm
HELP HELP HELP!
Where do I find the Firmware Bundle (IPSW)?
Derik Says: 23.08.08 at 8:42 pm
hey everyone, will this work for the Iphone 3G running 2.0.2? cause Doug just said iPhone. i rather be safe than sorry.
Doug Says: 23.08.08 at 10:30 pm
@Derik, you can put it on anything(even an ipod) running 2.0.2.
Pablos102030 Says: 24.08.08 at 4:22 am
Confirming that it works great on Ipod touch 16gb firmware 2.0.2. Sweet. I haven’t had a jailbroken device since 1.1.4 because it was too much of a hassle.
Derik Says: 24.08.08 at 1:30 pm
comfirming it does work on a iphone 3G. it is a little buggy though. i’m redoing the whole process because it wouldnt let me change my wallpaper anymore. oh, and installer is buggy. everyone knows that though. (beta :[ )
Kasper Says: 24.08.08 at 3:34 pm
please where to browse the firmware bundle? anyone know?
Ragez Says: 25.08.08 at 12:34 am
I have tried this thrice already and it does not work.
I have a 2.0.1 pwned iPhone.
I am fine upto Operation 7 (in the command prompt). On Operation 8, the phone just restarts into the same old 2.0.1 and the command prompt gets stuck at “Please wait …while you phone is being jailbroken….”. DEAD. Nothing happens after that, the phone is still there.
Doug Says: 25.08.08 at 1:06 am
@ragez, update to 2.0.2 stock(not jailbroken/pwned)
then quickpwn it
Ragez Says: 25.08.08 at 6:26 am
@Doug. It worked. Thanks.
Ragez Says: 26.08.08 at 6:57 am
Well. I was able to upgrade to 2.0.2 using Quickpwn.
Now i have an issue that i cant resolve. For some reason the only sound my phone makes is when the phone rings. All other sound is enabled in the settings but doesnt play.
Anyone has a clue if i am missing anything here.
Thanks.
Andrei Says: 26.08.08 at 4:14 pm
Worked just fine, thanks for the info ;)
Rino Says: 29.08.08 at 8:21 am
Hi from Europe
Have a Sim Free 3g 16gb that I jailbroke with WinPwn 2.0.4 and all went well.
Tried the QuickPwn yesterday and after 4 tries still my 3g shows Ver 2.0.1 (and not 2.0.2 as expected)
Question: Do I need to Upgrade the iPhone first to Ver 2.0.2 via iTunes and then use QuickPwn or the meaning of this program is that to upgrade my 3g to Ver 2.0.2 automatically?
A clear answer will be appreciated. Thanks
Doug Says: 29.08.08 at 1:43 pm
You will need to upgrade to 2.0.2 and then use quickpwn
any Says: 01.09.08 at 8:38 am
i have a 3g on 2.0.2 and i have used winpwn and it has installed all fine but i have no service. Do you think using quickpwn would help and do i need to (how do i?) restore the iphone before running quickpwn
Jazza Says: 02.09.08 at 4:30 am
HELP!!!!!!!!!!!! Where do you find the firmware undle and what is the name of it
Doug Says: 02.09.08 at 6:53 pm
@any i would have to guess, yes
@jazza you can find the guide @ installerapps.com/jailbreak
Rosalba Says: 07.09.08 at 12:53 am
Hi, im having a problem, and i dont know what happened. I just downloaded the quickpwn, so i unzipped, everything good till now… then i try to execute quickpwn by 2clicking it, and the next message appears (sorry for my lousy translation, im from mexico and the message of course is spanish):
Error on the application:
The application couldnt initiate correctly (0xc0000135). Click on accept to finish the application.
What’s the problem, is the program wrong or is it something with my pc?
pelle Says: 14.09.08 at 3:39 pm
Hello, I’m trying to jailbreak my new, just update’d Iphone, but when the black command line appears, it shows me an error and gets me back to the main programme :(
Arassaaa Says: 02.10.08 at 5:24 am
umm…i downloaded e quikpwn ing bu wen i ry o open it, it says i cant…help plz?